Novotechnik MUK signal conditioners supply position sensors with a highly-stable, constant voltage.
The wiper signal is picked off without load via a high-resistance input stage and transformed into a displacement or rotationally proportional standardised output signal.
The excellent linearity, low temperature drift and sensor proximity of the signal conditioning process ensure full utilisation of the outstanding benefits of the position sensors, guaranteeing the reliable, interference-free transmission of signals even over long distances.
The zero point and range can be adjusted independently of each other within wide limits using spindle trimmers. This facility permits standardised output signals to be adjusted even if the maximum stroke / angle of the sensor is not completely utilised.
The electronic circuitry is accommodated in an aluminium die-cast housing conforming to protection class IP-66. The UNI-sealed threaded joint ensures a correct EMC coupling of the cable shield.
The wide operating voltage range allows the unit to be supplied with an unstabilised direct voltage source. Selected SMD components with a wide temperature range guarantee maximum operating reliability even under extreme environmental conditions.
The MUK 350 is connected by means of a four-pole terminal strip.
- Product Specification
Manufacturer Novotechnik Linearity typical 0.01% FS Environmental Protection Level: IP 66 (DIN 400 50 / IEC 529) Power Supply 18...30Vdc Operating Temperature -25° to 70°C Overall Dimensions w x d x h 58mm x 64mm x 35mm Housing die-cast aluminum case Net Weight 200g Nominal Resistance >10MΩ Output 0 ... 20 mA Connection Type Screw-type terminals 1.0 mm2 Current Consumption 35mA Sensor Supply 10Vdc Zero Adjustment 20%