Call us: 01908 972 660
Lines open 9am - 5.30pm Mon-Fri

HB Sauter Mechanical Shore Hardness Durometer

Measuring Range: : 0 - 100H

More Views

Description

The HB mechanical shore hardness or durometer is designed to measure the hardness on various products, comes in 3 hardness types Shore A, C and D each unit is supplied in a wooden carrying case for protection of the product whilst not being used.

  1. Shore A is for use on products like rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials.
  2. Shore C is for use on products such as foam, sponge or similar materials
  3. Shore D is for use on products such as plastics, formica, epoxies, plexiglass and similar materials

Particularly recommended for Internal comparison Measurement. Standard Calibrations e.g. to DIN 53505 are often not possible because of very narrow standard tolerances.

No Calibration Certificates are offered for the Gauge, they are only possible on the calibration plates found under accessories.

HB Sauter Mechanical Shore Hardness Durometer

Measuring Range: : 0 - 100H

The HB mechanical shore hardness or durometer comes in 3 variants including Shore A, B and C. This model is designed to measure the hardness on various products including rubber, plastics, foam and vinyl.
View additional details.

There are 3 variations of this product available:
Sauter HB Mechanical Shore Hardness Durometer | Measurement Shop UK

HBA 100-0 - Click name for details

Hardness Type
Shore A
Hardness Range
100HA
Precision
3 % of [Max]

Excl. VAT: £105.00 Incl. VAT: £126.00
Sauter HB Mechanical Shore Hardness Durometer | Measurement Shop UK

HB0 100-0 - Click name for details

Hardness Type
Shore A0
Hardness Range
100HA0
Precision
3 % of [Max]

Excl. VAT: £135.00 Incl. VAT: £162.00
Sauter HB Mechanical Shore Hardness Durometer | Measurement Shop UK

HBD 100-0 - Click name for details

Hardness Type
Shore D
Hardness Range
100HD
Precision
3 % of [Max]

Excl. VAT: £140.00 Incl. VAT: £168.00
Product Features

Features

12 Month Warranty

Typical application: measurement of penetration (Shore)

Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances

Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material

Shore D plastics, formica, epoxides, plexiglass etc.

Shore A0 foam, sponge etc.

Max mode: Holds the maximum value in the display

Point mode: Shows one instant value

Can be attached to the test stands SAUTER TI-A0 (for Shore A and A0), TI-D. (for Shore D)

Delivered in a wooden carrying case

Key Product Specifications Chart

KEY SPECIFICATIONS

ProductHardness TypeHardness RangePrecisionMin. Sample ThicknessMaterial
HBA 100-0 - Click name for details Shore A100HA3 % of [Max]Metal
HB0 100-0 - Click name for details Shore A0100HA03 % of [Max]Metal
HBD 100-0 - Click name for details Shore D100HD3 % of [Max]Metal
Downloads

File Download

Manual
Open/Download PDF
Datasheet/Brochure
Open/Download PDF
Accessories

Related Accessories

The Measurement Shop is a trading name of Inscale Ltd., a company registered in England and Wales with company number: 6662983. VAT No: GB 936846676
Registered office address: Inscale Ltd, 420 Silbury Boulevard, Milton Keynes, Bucks, MK9 2AF, UK

© 2019 The Measurement Shop. All Rights Reserved.