- Product Features
Very high operating speed
Ball coupling avoids side loads
Long life >100 x 106 movements
Outstanding linearity - up to ±0.02 %
High resolution – better than 0.01 mm
Connector to DIN 43650 (hydraulic connector)
Protection class IP 54 - mounted slider-side down
- Key Product Specifications Chart
Product Electrical range Nominal Resistance Linearity Electrical Stroke Mechanical Stroke TLH-0100 - Click name for details 100mm 3kΩ 0.1 ±% 102mm 108 ±2 mm TLH-0130 - Click name for details 130mm 3kΩ 0.09 ±% 132mm 138 ±2 mm TLH-0150 - Click name for details 150mm 5kΩ 0.08 ±% 152mm 158 ±2 mm TLH-0225 - Click name for details 225mm 5kΩ 0.07 ±% 228mm 234 ±2 mm TLH-0300 - Click name for details 300mm 5kΩ 0.06 ±% 304mm 310 ±2 mm TLH-0360 - Click name for details 360mm 5kΩ 0.05 ±% 366mm 372 ±2 mm TLH-0450 - Click name for details 450mm 5kΩ 0.05 ±% 457mm 463 ±2 mm TLH-0500 - Click name for details 500mm 5kΩ 0.05 ±% 508mm 514 ±2 mm TLH-0600 - Click name for details 600mm 5kΩ 0.05 ±% 610mm 616 ±2 mm TLH-0750 - Click name for details 750mm 10kΩ 0.04 ±% 762mm 768 ±2 mm TLH-0900 - Click name for details 900mm 10kΩ 0.04 ±% 914mm 920 ±2 mm TLH-1000 - Click name for details 1000mm 10kΩ 0.04 ±% 1016mm 1022 ±2 mm TLH-1250 - Click name for details 1250mm 10kΩ 0.03 ±% 1270mm 1276 ±2 mm TLH-1500 - Click name for details 1500mm 20kΩ 0.03 ±% 1520mm 1526 ±2 mm TLH-1750 - Click name for details 1750mm 20kΩ 0.03 ±% 1770mm 1776 ±2 mm TLH-2000 - Click name for details 2000mm 20kΩ 0.02 ±% 2020mm 2026 ±2 mm TLH-2250 - Click name for details 2250mm 20kΩ 0.02 ±% 2270mm 2276 ±2 mm TLH-2500 - Click name for details 2500mm 20kΩ 0.02 ±% 2520mm 2526 ±2 mm TLH-2750 - Click name for details 2750mm 20kΩ 0.02 ±% 2770mm 2776 ±2 mm TLH-3000 - Click name for details 3000mm 20kΩ 0.02 ±% 3020mm 3026 ±2 mm
Application: Injection Molding Machines
Product: Position Transducers LWH and TLH
In injection molding machines, all values relevant to the process of manufacturing thermoplastic and duroplastic items are measured and stored. The positions of various mechanical parts are measured, as well as pressure and temperature. The goal is to achieve a consistently high quality of molded items and a short preparation time during tool changes.
Function: Either the position transducer LWH or TLH is used for measurements, depending on the mechanical construction of the customer's various products. The effective lengths range from 75 mm on ejection pins and dosing cylinders, to 1500 mm on injection molding aggregates and clamping units.
Production in shifts, shorter cycle times and low tolerances of the molded items require a high reliability and precision from the employed position measurement system.